DeWalt DCMWP234 Lawn Mower Manual

The DeWalt DCMWP234 is a 20-inch cordless electric lawn mower featuring a brushless motor, dual 20V MAX* batteries (or single 40V MAX* battery compatibility), 3-in-1 functionality (mulch, bag, side discharge), 7-position height adjustment, foldable handle for storage, LED headlight, and weather-resistant construction. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Battery Installation & Charging 7. Mowing Operations 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Brushless motor deck, battery compartment, height adjustment lever, foldable handle, grass bag, safety key, and LED headlight.

FeatureDescription
Power SourceDual 20V MAX* or single 40V MAX* battery system
Cutting Width20-inch steel deck
Cutting Height7-position adjustment (1.5" to 4")
3-in-1 FunctionMulch, bag, or side discharge capability
Motor TypeBrushless for increased efficiency and runtime
HandleFoldable for compact storage
HeadlightLED for low-light conditions
Safety KeyRemovable key to prevent accidental start
WeightApprox. 65 lbs (without battery)
Warranty3-year limited warranty

Assembly Instructions

Unpack all parts and inspect for damage. Assembly requires basic tools (included).

  1. Attach the lower handle: Align with deck brackets and secure with provided bolts.
  2. Install the upper handle: Connect to lower handle, tighten knobs.
  3. Attach grass bag: Hook bag onto rear deck hooks.
  4. Install side discharge chute (if needed): Snap into place on right side.
  5. Install battery: Insert fully charged battery into compartment.

WARNING! Ensure mower is turned off and battery is removed during assembly. Keep hands clear of blade area.

First-Time Setup

Prepare mower for initial use.

  1. Charge battery: Use DeWalt charger until indicator shows full charge.
  2. Adjust cutting height: Set lever to desired position (recommend 3" for first use).
  3. Select mode: Install mulch plug, bag, or side discharge chute as needed.
  4. Insert safety key: Push fully into slot near handle.
  5. Test operation: In a clear area, press safety lever and start switch to ensure proper function.

CAUTION! Always wear sturdy shoes and eye protection. Clear mowing area of debris.

Specifications

Controls and Settings

Primary controls located on upper handle.

Handle Controls: Safety lever (must be held), Start/Stop switch, Battery gauge, Height adjustment lever.

Operation: Press and hold safety lever, then press start switch. Release either to stop blade. Height adjustment: Move lever to one of 7 positions. Battery: Check fuel gauge for charge level. Mode selection: Install mulch plug for mulching, bag for collection, or chute for side discharge.

Battery Installation & Charging

Compatible with DeWalt 20V MAX* and 40V MAX* batteries.

  1. Insert battery: Slide into compartment until it clicks.
  2. Remove battery: Press release buttons and pull out.
  3. Charging: Use DeWalt charger; plug into outlet, insert battery. LED indicates charging status.
  4. Storage: Store batteries in cool, dry place away from metal objects.

Tip: For best performance, use fully charged batteries and keep spare batteries ready.

Mowing Operations

Follow proper mowing techniques for best results.

  1. Pre-check: Clear area of stones, toys, and debris.
  2. Start mower: Hold safety lever, press start switch.
  3. Mowing pattern: Overlap each pass by 2-3 inches.
  4. Adjust speed: Move at steady pace; avoid rushing.
  5. Empty bag: When bag full indicator shows, stop mower and empty clippings.
  6. After mowing: Turn off, remove safety key, and clean underside.

WARNING! Never operate without safety key installed. Keep hands and feet away from moving parts.

Safety Features

Safety key: Must be inserted to operate. Safety lever: Requires constant pressure. Blade brake: Stops blade within 3 seconds of release. LED headlight: Improves visibility in low light.

Care & Maintenance

Regular maintenance ensures long life and optimal performance.

  1. After each use: Clean underside with brush or hose (after disconnecting battery).
  2. Blade sharpening: Inspect monthly; sharpen or replace if dull or damaged.
  3. Battery care: Keep terminals clean; store at room temperature.
  4. Winter storage: Clean thoroughly, remove battery, store in dry place.

CAUTION! Always disconnect battery before performing any maintenance. Wear gloves when handling blade.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. EPA compliant: Electric motor produces zero emissions. Copyright © 2023 DeWalt; trademarks of Stanley Black & Decker, Inc. For support, visit www.dewalt.com or contact 1-800-4-DeWalt (1-800-433-9258).

Troubleshooting

SymptomPossible CauseCorrective Action
Mower won't startBattery dead/safety keyCharge battery; ensure safety key fully inserted.
Poor cutting performanceDull blade/wrong heightSharpen or replace blade; adjust cutting height.
Battery drains quicklyOld battery/heavy grassUse fresh battery; mow more frequently.
Uneven cutDeck clogged/wheels unevenClean deck; check tire pressure/height settings.
Unusual vibration/noiseDamaged blade/debrisStop immediately; inspect blade and remove debris.

Reset: Remove battery for 30 seconds, then reinsert.

Service: 1-800-4-DeWalt; www.dewalt.com

DeWalt DCMWP234 Lawn Mower Manual © - All Rights Reserved 2025