DeWalt DCMWP600X2 Lawn Mower Manual

The DeWalt DCMWP600X2 is a 60V MAX* cordless electric walk-behind lawn mower featuring two 10.0Ah FLEXVOLT batteries, brushless motor technology, a 21-inch steel deck, 6-position single-lever height adjustment (1.5" to 4"), 2-in-1 mulching and rear bagging capability, LED headlights, foldable handle for storage, and a weather-resistant construction. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: 21-inch steel cutting deck, Brushless Motor, FLEXVOLT Battery System (2x 10.0Ah), Single-Lever Height Adjustment, 2-in-1 Function, LED Headlights, Foldable Handle, Rear Discharge Chute.

Assembly Instructions

Unpack all parts and inspect for damage. Assembly requires basic tools (included).

1. Attach the Lower Handle: Align lower handle with deck brackets and secure with provided bolts and wrench.
2. Install the Upper Handle: Slide upper handle onto lower handle posts. Secure with knobs or bolts.
3. Attach the Grass Bag: Hook bag frame onto rear deck mounts. Ensure it clicks into place.
4. Install the Battery: Insert both FLEXVOLT batteries into the battery ports until they click. Charge fully before first use.
5. Install Safety Key: Insert the removable safety key into the slot near the control panel.

WARNING! Do not install batteries or attempt to start mower until assembly is complete and you have read the safety instructions.

First-Time Setup

Before first mow, complete these steps.

1. Fully Charge Batteries: Use the DeWalt charger to charge both batteries to 100%.
2. Adjust Cutting Height: Set the single lever to your desired height (recommend starting at 3" for first mow).
3. Select Cutting Mode: Install mulch plug for mulching, or attach grass bag for collection.
4. Perform Safety Check: Ensure area is clear of debris, people, and pets. Verify safety key is inserted.

CAUTION! Always mow in clear daylight or with headlights on. Do not mow wet grass.

Specifications

• Model: DCMWP600X2
• Power System: 60V MAX* FLEXVOLT
• Batteries Included: (2) DCB610 10.0Ah FLEXVOLT
• Cutting Width: 21 inches
• Cutting Height Range: 1.5" - 4" (6 positions)
• Deck Material: Powder-coated steel
• Motor: Brushless
• Weight (without batteries): 65 lbs
• Wheels: 8" rear, 7" front
• Charger: DCB115 60V/20V MAX* Charger included

Controls and Operation

Control Panel located on upper handle. Key Controls: START/STOP lever (deadman switch), Battery Fuel Gauges, LED Light Button.

Starting: Insert safety key. Press and hold the START/STOP lever against the handle. The mower will start when the lever is fully engaged.

Stopping: Release the START/STOP lever. The blade will stop within 3 seconds. Remove safety key for storage.

Operation Tips: Mow at a steady walking pace. Overlap passes slightly for even cut. Use headlights in low light.

Cutting Height Adjustment

Use the single lever on each wheel to adjust height simultaneously.

1. Locate the adjustment lever next to each wheel.
2. Pull lever outward to disengage from notch.
3. Move lever to desired height setting (1.5, 2, 2.5, 3, 3.5, 4 inches).
4. Release lever to lock into notch. Ensure all four levers are set to the same position.

Tip: For healthier grass, never cut more than 1/3 of the grass blade length at one time.

Mulching & Bagging

The mower operates in two modes. Conversion takes less than a minute.

Mulching Mode:

1. Ensure grass bag is removed.
2. Install the mulch plug into the rear discharge chute. It should snap securely into place.
3. Mulching cuts clippings finely and returns them to the lawn as fertilizer.

Bagging Mode:

1. Remove the mulch plug.
2. Attach the grass bag frame to the rear mounts. Hang the fabric bag on the frame.
3. Empty bag frequently to maintain airflow and cutting performance.

Battery Care & Charging

Use only DeWalt FLEXVOLT 60V/20V MAX batteries and charger.

1. Charging: Insert battery into charger. Charger light will indicate status (red=charging, green=complete).
2. Storage: Store batteries in a cool, dry place away from metal objects. For long-term storage, charge to 40-60%.
3. Runtime: With two 10.0Ah batteries, expect up to 60 minutes of runtime on a typical lawn (varies with grass conditions).
4. Fuel Gauges: Press button on battery to see charge level (LED indicators).

WARNING! Do not expose batteries to fire or extreme heat. Do not puncture.

Maintenance & Storage

Regular maintenance ensures optimal performance and longevity.

• After Each Use: Clean underside of deck with brush or hose (ensure mower is OFF and batteries removed). Wipe down handle and deck.
• Blade Sharpening/Replacement: Inspect blade monthly for dullness or damage. Use a wrench to remove bolt (disconnect batteries first). Sharpen or replace with DeWalt part #XXXXX.
• Wheel & Bearing Check: Ensure wheels spin freely. Lubricate axle points if necessary.
• Off-Season Storage: Fully charge batteries, then remove and store separately. Clean mower thoroughly. Fold handle and store in a dry place.

CAUTION! Always disconnect batteries before performing any maintenance.

Safety Information

Read all instructions before use. Failure to follow warnings can result in serious injury.

• Always wear safety glasses, long pants, and sturdy shoes.
• Keep bystanders, especially children and pets, away from the area.
• Inspect the area for stones, sticks, or debris before mowing.
• Do not operate on steep slopes (greater than 15 degrees).
• Never remove safety key while blade is moving.
• Do not mow in reverse unless absolutely necessary, and always look behind you.
• The blade is sharp! Handle with extreme care.

Troubleshooting

Service: For repairs, contact DeWalt Customer Service at 1-800-4-DeWalt (1-800-433-9258) or visit www.dewalt.com. Use only genuine DeWalt replacement parts.