DeWalt XR DCMWSP564N Lawn Mower Manual

The DeWalt XR DCMWSP564N is a 56V MAX Cordless Brushless Self-Propelled Lawn Mower featuring a 21-inch steel deck, 2-in-1 mulching and bagging capability, 7-position height adjustment, variable speed self-propulsion, LED headlights, and powered by DeWalt FLEXVOLT 60V/20V MAX batteries. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: 21-inch steel cutting deck, Brushless motor, Self-propulsion system, 7-position single-lever height adjustment, 2-in-1 mulch/bag system, LED headlights, Battery port, Handle with controls.

Assembly Instructions

Unpack all parts and inspect for damage. Assembly requires basic tools (included).

1. Attach lower handle: Align with deck brackets, secure with provided bolts.
2. Install upper handle: Connect to lower handle, tighten knobs.
3. Attach grass bag: Slide bag frame onto rear deck hooks until it clicks.
4. Install mulch plug: For mulching mode, insert plug into rear discharge chute.
5. Install battery: Insert fully charged FLEXVOLT battery into battery port.

WARNING! Ensure all bolts are tightened securely. Do not operate without proper assembly.

First-Time Setup

Prepare mower for initial use.

1. Charge battery: Use DeWalt charger until full (LED indicator shows green).
2. Adjust cutting height: Set lever to desired position (recommend 3" for first use).
3. Select cutting mode: Install mulch plug or grass bag as needed.
4. Insert safety key: Place into slot near handle.
5. Test operation: In clear area, press safety lever and start button to verify function.

CAUTION! Keep hands and feet away from cutting deck during operation.

Specifications

• Model: DeWalt XR DCMWSP564N
• Cutting Width: 21 inches
• Deck Material: Steel
• Height Adjustment: 7 positions (1.5" to 4")
• Power: 56V MAX FLEXVOLT Battery System
• Motor: Brushless
• Self-Propulsion: Variable speed (0-3.5 mph)
• Cutting Modes: Mulch and bag (2-in-1)
• Battery: FLEXVOLT 60V/20V MAX (sold separately or in kit)
• Weight: 65 lbs (without battery)
• Warranty: 3-year limited warranty

Controls and Settings

Handle controls: Safety lever, Start/Stop button, Self-propel speed control, Battery gauge.

Deck controls: Height adjustment lever, Mulch plug, Bag attachment.

Operation: Press and hold safety lever to handle, then press start button. Release safety lever to stop blade. Self-propel: Squeeze drive control lever to engage wheel drive; adjust speed with thumb wheel. Height adjustment: Move single lever to one of 7 positions. Battery: Insert/remove by pressing battery release buttons.

Battery Installation & Charging

Compatible with DeWalt FLEXVOLT 60V/20V MAX batteries.

1. Insert battery: Align with port, slide in until it clicks.
2. Remove battery: Press release buttons on both sides, pull out.
3. Charging: Use DeWalt charger (DCB107, etc.). Plug into outlet, insert battery.
4. Charge indicators: Red = charging, Green = fully charged.

Tip: Store batteries in cool, dry place. Use only DeWalt chargers.

Mowing Operation

For optimal performance and safety.

1. Clear area: Remove stones, sticks, debris before mowing.
2. Check battery: Ensure adequate charge (battery gauge on mower).
3. Start mower: Insert safety key, hold safety lever, press start button.
4. Engage self-propel: Squeeze drive control lever; adjust speed as needed.
5. Mow in overlapping passes: For even cut, overlap each pass by a few inches.
6. Empty bag: When bag full indicator shows, stop mower and empty grass bag.
7. Shut down: Release safety lever to stop blade. Remove safety key.

WARNING! Always wear eye protection and sturdy footwear. Do not mow wet grass.

Height Adjustment & Cutting Modes

Adjust cutting height: Move lever to desired setting (1.5", 2", 2.5", 3", 3.5", 4").

Mulching mode: Install mulch plug; cuts clippings finely and returns to lawn.

Bagging mode: Attach grass bag; collects clippings for disposal.

Note: For best mulching, mow frequently and avoid cutting more than 1/3 of grass height.

Maintenance & Storage

Regular maintenance ensures longevity.

1. Clean deck: After each use, remove grass buildup (mower off, battery removed).
2. Sharpen blade: Periodically inspect; sharpen or replace dull/damaged blade.
3. Check bolts: Tighten handle and deck bolts as needed.
4. Store properly: Clean mower, remove battery, store in dry location.
5. Winter storage: Fully charge battery, store separately in cool, dry place.

CAUTION! Always disconnect battery before performing maintenance.

Safety Information

Read and follow all safety instructions in manual.

• Wear eye and hearing protection, long pants, sturdy shoes.
• Keep bystanders, children, and pets away from mowing area.
• Do not operate on slopes greater than 15 degrees.
• Never remove safety key while blade is moving.
• Do not put hands or feet near cutting deck.
• Use only DeWalt FLEXVOLT batteries and chargers.
• Avoid mowing in wet conditions or at night (unless using headlights).

Troubleshooting

Reset: Remove battery for 30 seconds, then reinsert.

Service: 1-800-433-9258; www.dewalt.com